byp4a55 professor6T9

Linux server1.hnhtechsolutions.com 4.18.0-553.78.1.el8_10.x86_64 #1 SMP Tue Oct 7 04:15:13 EDT 2025 x86_64
Apache
198.177.124.167

File Name : default.zip

PK�����.biZӖ�ҭ�������grubnu��[�����������GRUB_ENABLE_BLSCFG=true
GRUB_TIMEOUT=5
GRUB_DEFAULT=0
GRUB_DISABLE_SUBMENU="true"
GRUB_TERMINAL_OUTPUT="console"
GRUB_CMDLINE_LINUX="vconsole.keymap=us crashkernel=no vconsole.font=latarcyrheb-sun16 console=tty1 console=ttyS0 quiet net.ifnames=0"
GRUB_TERMINAL="serial console"
GRUB_DISABLE_RECOVERY="true"
GRUB_DISABLE_UUID="true"
GRUB_DISABLE_LINUX_UUID="true"
GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)"
PK�����.biZX�_Gw���w�����useraddnu��[�����������# useradd defaults file
GROUP=100
HOME=/home
INACTIVE=-1
EXPIRE=
SHELL=/bin/bash
SKEL=/etc/skel
CREATE_MAIL_SPOOL=yes

PK�����J3kZ�=\g���g�����minimal/dconf-dbnu��[�����������[org/gnome/login-screen]
enable-smartcard-authentication=false
enable-fingerprint-authentication=false
PK�����J3kZQ��r���r�����minimal/dconf-locksnu��[�����������/org/gnome/login-screen/enable-smartcard-authentication
/org/gnome/login-screen/enable-fingerprint-authentication
PK�����J3kZ�.�x1���1�����minimal/smartcard-authnu��[�����������auth required pam_debug.so auth=authinfo_unavail
PK�����J3kZ�.�x1���1�����minimal/fingerprint-authnu��[�����������auth required pam_debug.so auth=authinfo_unavail
PK�����J3kZ�2�zL��L����minimal/postloginnu��[�����������auth        optional                   pam_ecryptfs.so unwrap                                 {include if "with-ecryptfs"}

password    optional                   pam_ecryptfs.so unwrap                                 {include if "with-ecryptfs"}

session     optional                   pam_umask.so silent
session     [success=1 default=ignore] pam_succeed_if.so service !~ gdm* service !~ su* quiet
session     [default=1]                pam_lastlog.so nowtmp {if "with-silent-lastlog":silent|showfailed}
session     optional                   pam_lastlog.so silent noupdate showfailed
PK�����J3kZ�L=W��W����minimal/REQUIREMENTSnu��[�����������- with-mkhomedir is selected, make sure pam_oddjob_mkhomedir module                       {include if "with-mkhomedir"}
  is present and oddjobd service is enabled and active                                    {include if "with-mkhomedir"}
  - systemctl enable --now oddjobd.service                                                {include if "with-mkhomedir"}
                                                                                          {include if "with-mkhomedir"}
- with-altfiles is selected, make sure nss_altfiles module is present                     {include if "with-altfiles"}
PK�����J3kZ)�.xI
��I
����minimal/READMEnu��[�����������Local users only for minimal installations
==========================================

Selecting this profile will enable local files as the source of identity
and authentication providers.

This profile can be used on systems that require minimal installation to
save disk and memory space. It serves only local users and groups directly
from system files instead of going through other authentication providers.
Therefore SSSD, winbind and fprintd packages can be safely removed.

Unless this system has strict memory and disk constraints, it is recommended
to keep SSSD running and use 'sssd' profile to avoid functional limitations.

AVAILABLE OPTIONAL FEATURES
---------------------------

with-faillock::
    Enable account locking in case of too many consecutive
    authentication failures.

with-mkhomedir::
    Enable automatic creation of home directories for users on their
    first login.

with-ecryptfs::
    Enable automatic per-user ecryptfs.

with-silent-lastlog::
    Do not produce pam_lastlog message during login.

with-pamaccess::
    Check access.conf during account authorization.

with-pwhistory::
    Enable pam_pwhistory module for local users.

with-altfiles::
    Use nss_altfiles for passwd and group nsswitch databases.

without-nullok::
    Do not add nullok parameter to pam_unix.

DISABLE SPECIFIC NSSWITCH DATABASES
-----------------------------------

Normally, nsswitch databases set by the profile overwrites values set in
user-nsswitch.conf. The following options can force authselect to
ignore value set by the profile and use the one set in user-nsswitch.conf
instead.

with-custom-aliases::
Ignore "aliases" map set by the profile.

with-custom-automount::
Ignore "automount" map set by the profile.

with-custom-ethers::
Ignore "ethers" map set by the profile.

with-custom-group::
Ignore "group" map set by the profile.

with-custom-hosts::
Ignore "hosts" map set by the profile.

with-custom-initgroups::
Ignore "initgroups" map set by the profile.

with-custom-netgroup::
Ignore "netgroup" map set by the profile.

with-custom-networks::
Ignore "networks" map set by the profile.

with-custom-passwd::
Ignore "passwd" map set by the profile.

with-custom-protocols::
Ignore "protocols" map set by the profile.

with-custom-publickey::
Ignore "publickey" map set by the profile.

with-custom-rpc::
Ignore "rpc" map set by the profile.

with-custom-services::
Ignore "services" map set by the profile.

with-custom-shadow::
Ignore "shadow" map set by the profile.

EXAMPLES
--------

* Enable minimal profile

authselect select minimal

SEE ALSO
--------
* man passwd(5)
* man group(5)
PK�����J3kZ�U�8��������minimal/system-authnu��[�����������auth        required                                     pam_env.so
auth        required                                     pam_faildelay.so delay=2000000
auth        required                                     pam_faillock.so preauth silent                         {include if "with-faillock"}
auth        sufficient                                   pam_unix.so {if not "without-nullok":nullok}
auth        required                                     pam_faillock.so authfail                               {include if "with-faillock"}
auth        required                                     pam_deny.so

account     required                                     pam_access.so                                          {include if "with-pamaccess"}
account     required                                     pam_faillock.so                                        {include if "with-faillock"}
account     required                                     pam_unix.so

password    requisite                                    pam_pwquality.so
password    [default=1 ignore=ignore success=ok]         pam_localuser.so                                       {include if "with-pwhistory"}
password    requisite                                    pam_pwhistory.so use_authtok                           {include if "with-pwhistory"}
password    sufficient                                   pam_unix.so sha512 shadow {if not "without-nullok":nullok} use_authtok
password    required                                     pam_deny.so

session     optional                                     pam_keyinit.so revoke
session     required                                     pam_limits.so
session     optional                                     pam_ecryptfs.so unwrap                                {include if "with-ecryptfs"}
-session    optional                                     pam_systemd.so
session     optional                                     pam_oddjob_mkhomedir.so                               {include if "with-mkhomedir"}
session     [success=1 default=ignore]                   pam_succeed_if.so service in crond quiet use_uid
session     required                                     pam_unix.so
PK�����J3kZ����������minimal/nsswitch.confnu��[�����������aliases:    files                                       {exclude if "with-custom-aliases"}
automount:  files                                       {exclude if "with-custom-automount"}
ethers:     files                                       {exclude if "with-custom-ethers"}
group:      files {if "with-altfiles":altfiles }systemd {exclude if "with-custom-group"}
hosts:      files dns myhostname                        {exclude if "with-custom-hosts"}
initgroups: files                                       {exclude if "with-custom-initgroups"}
netgroup:   files                                       {exclude if "with-custom-netgroup"}
networks:   files                                       {exclude if "with-custom-networks"}
passwd:     files {if "with-altfiles":altfiles }systemd {exclude if "with-custom-passwd"}
protocols:  files                                       {exclude if "with-custom-protocols"}
publickey:  files                                       {exclude if "with-custom-publickey"}
rpc:        files                                       {exclude if "with-custom-rpc"}
services:   files                                       {exclude if "with-custom-services"}
shadow:     files                                       {exclude if "with-custom-shadow"}PK�����J3kZ*������
��sssd/dconf-dbnu��[�����������{imply "with-smartcard" if "with-smartcard-required"}
{imply "with-smartcard" if "with-smartcard-lock-on-removal"}
[org/gnome/login-screen]
enable-smartcard-authentication={if "with-smartcard":true|false}
enable-fingerprint-authentication={if "with-fingerprint":true|false}
enable-password-authentication={if "with-smartcard-required":false|true}

[org/gnome/settings-daemon/peripherals/smartcard] {include if "with-smartcard-lock-on-removal"}
removal-action='lock-screen'                      {include if "with-smartcard-lock-on-removal"}
PK�����J3kZk�������sssd/dconf-locksnu��[�����������/org/gnome/login-screen/enable-smartcard-authentication
/org/gnome/login-screen/enable-fingerprint-authentication
/org/gnome/login-screen/enable-password-authentication
/org/gnome/settings-daemon/peripherals/smartcard/removal-action {include if "with-smartcard-lock-on-removal"}
PK�����J3kZ�sX�3	��3	����sssd/smartcard-authnu��[�����������{imply "with-smartcard" if "with-smartcard-required"}
auth required pam_debug.so auth=authinfo_unavail {exclude if "with-smartcard"}
{continue if "with-smartcard"}
auth        required                                     pam_env.so
auth        required                                     pam_faillock.so preauth silent                         {include if "with-faillock"}
auth        sufficient                                   pam_sss.so allow_missing_name {if "with-smartcard-required":require_cert_auth}
auth        required                                     pam_faillock.so authfail                               {include if "with-faillock"}
auth        optional                                     pam_gnome_keyring.so only_if=login auto_start          {include if "with-pam-gnome-keyring"}
auth        required                                     pam_deny.so

account     required                                     pam_access.so                                          {include if "with-pamaccess"}
account     required                                     pam_faillock.so                                        {include if "with-faillock"}
account     required                                     pam_unix.so
account     sufficient                                   pam_localuser.so                                       {exclude if "with-files-access-provider"}
account     sufficient                                   pam_usertype.so issystem
account     [default=bad success=ok user_unknown=ignore] pam_sss.so
account     required                                     pam_permit.so

password    required                                     pam_deny.so

Selecting this profile will enable SSSD as the source of identity
and authentication providers.

SSSD provides a set of daemons to manage access to remote directories and
authentication mechanisms such as LDAP, Kerberos, FreeIPA or AD. It provides
an NSS and PAM interface toward the system and a pluggable backend system
to connect to multiple different account sources.

More information about SSSD can be found on its project page:
https://sssd.io

However, if you do not want to keep SSSD running on your machine, you can
keep this profile selected and just disable SSSD service. The resulting
configuration will still work correctly even with SSSD disabled and local users
and groups will be read from local files directly.

SSSD CONFIGURATION
------------------

Authselect does not touch SSSD's configuration. Please, read SSSD's
documentation to see how to configure it manually. Only local users
will be available on the system if there is no existing SSSD configuration.

AVAILABLE OPTIONAL FEATURES
---------------------------

with-faillock::
    Enable account locking in case of too many consecutive
    authentication failures.

with-mkhomedir::
    Enable automatic creation of home directories for users on their
    first login.

with-smartcard::
    Enable authentication with smartcards through SSSD. Please note that
    smartcard support must be also explicitly enabled within
    SSSD's configuration.

with-smartcard-lock-on-removal::
    Lock screen when a smartcard is removed.

with-smartcard-required::
    Smartcard authentication is required. No other means of authentication
    (including password) will be enabled.

with-fingerprint::
    Enable authentication with fingerprint reader through *pam_fprintd*.

with-pam-gnome-keyring::
    Enable pam-gnome-keyring support.

with-pam-u2f::
    Enable authentication via u2f dongle through *pam_u2f*.

with-pam-u2f-2fa::
    Enable 2nd factor authentication via u2f dongle through *pam_u2f*.

without-pam-u2f-nouserok::
    Module argument nouserok is omitted if also with-pam-u2f-2fa is used.
    *WARNING*: Omitting nouserok argument means that users without pam-u2f
    authentication configured will not be able to log in *INCLUDING* root.
    Make sure you are able to log in before losing root privileges.

with-silent-lastlog::
    Do not produce pam_lastlog message during login.

with-sudo::
    Allow sudo to use SSSD as a source for sudo rules in addition of /etc/sudoers.

with-pamaccess::
    Check access.conf during account authorization.

with-pwhistory::
    Enable pam_pwhistory module for local users.

with-files-domain::
    If set, SSSD will be contacted before "files" when resolving users and
    groups. The order in nsswitch.conf will be set to "sss files" instead of
    "files sss" for passwd and group maps.

with-files-access-provider::
    If set, account management for local users is handled also by pam_sss. This
    is needed if there is an explicitly configured domain with id_provider=files
    and non-empty access_provider setting in sssd.conf.

*WARNING:* SSSD access check will become mandatory for local users and
    if SSSD is stopped then local users will not be able to log in. Only
    system accounts (as defined by pam_usertype, including root) will be
    able to log in.

with-gssapi::
    If set, pam_sss_gss module is enabled to perform user authentication over
    GSSAPI.

with-subid::
    Enable SSSD as a source of subid database in /etc/nsswitch.conf.

without-nullok::
    Do not add nullok parameter to pam_unix.

DISABLE SPECIFIC NSSWITCH DATABASES
-----------------------------------

with-custom-passwd::
Ignore "passwd" database set by the profile.

with-custom-group::
Ignore "group" database set by the profile.

with-custom-netgroup::
Ignore "netgroup" database set by the profile.

with-custom-automount::
Ignore "automount" database set by the profile.

with-custom-services::
Ignore "services" database set by the profile.

EXAMPLES
--------

* Enable SSSD with sudo and smartcard support

authselect select sssd with-sudo with-smartcard

* Enable SSSD with sudo support and create home directories for users on their
  first login

authselect select sssd with-mkhomedir with-sudo

SEE ALSO
--------
* man sssd.conf(5)
PK�����J3kZ��0\��������sssd/system-authnu��[�����������{imply "with-smartcard" if "with-smartcard-required"}
auth        required                                     pam_env.so
auth        required                                     pam_faildelay.so delay=2000000
auth        required                                     pam_faillock.so preauth silent                         {include if "with-faillock"}
auth        [success=1 default=ignore]                   pam_succeed_if.so service notin login:gdm:xdm:kdm:kde:xscreensaver:gnome-screensaver:kscreensaver quiet use_uid {include if "with-smartcard-required"}
auth        [success=done ignore=ignore default=die]     pam_sss.so require_cert_auth ignore_authinfo_unavail   {include if "with-smartcard-required"}
auth        sufficient                                   pam_fprintd.so                                         {include if "with-fingerprint"}
auth        sufficient                                   pam_u2f.so cue                                         {include if "with-pam-u2f"}
auth        required                                     pam_u2f.so cue {if not "without-pam-u2f-nouserok":nouserok} {include if "with-pam-u2f-2fa"}
auth        [default=1 ignore=ignore success=ok]         pam_usertype.so isregular
auth        [default=1 ignore=ignore success=ok]         pam_localuser.so                                       {exclude if "with-smartcard"}
auth        [default=2 ignore=ignore success=ok]         pam_localuser.so                                       {include if "with-smartcard"}
auth        [success=done authinfo_unavail=ignore user_unknown=ignore ignore=ignore default=die] pam_sss.so try_cert_auth {include if "with-smartcard"}
auth        sufficient                                   pam_unix.so {if not "without-nullok":nullok}
auth        [default=1 ignore=ignore success=ok]         pam_usertype.so isregular                              {include if "with-gssapi"}
auth        sufficient                                   pam_sss_gss.so                                         {include if "with-gssapi"}
auth        [default=1 ignore=ignore success=ok]         pam_usertype.so isregular
auth        sufficient                                   pam_sss.so forward_pass
auth        required                                     pam_faillock.so authfail                               {include if "with-faillock"}
auth        optional                                     pam_gnome_keyring.so only_if=login auto_start          {include if "with-pam-gnome-keyring"}
auth        required                                     pam_deny.so

password    requisite                                    pam_pwquality.so local_users_only
password    [default=1 ignore=ignore success=ok]         pam_localuser.so                                       {include if "with-pwhistory"}
password    requisite                                    pam_pwhistory.so use_authtok                           {include if "with-pwhistory"}
password    sufficient                                   pam_unix.so sha512 shadow {if not "without-nullok":nullok} use_authtok
password    [success=1 default=ignore]                   pam_localuser.so
password    sufficient                                   pam_sss.so use_authtok
password    required                                     pam_deny.so

account     required                                     pam_access.so                                          {include if "with-pamaccess"}
account     required                                     pam_faillock.so                                        {include if "with-faillock"}
account     required                                     pam_unix.so broken_shadow
account     sufficient                                   pam_localuser.so
account     sufficient                                   pam_usertype.so issystem
account     [default=bad success=ok user_unknown=ignore] pam_winbind.so {if "with-krb5":krb5_auth}
account     required                                     pam_permit.so

password    required                                     pam_deny.so

Selecting this profile will enable Samba's winbind as the source of identity
and authentication providers.

The Samba standard Windows interoperability suite of utilities allows Linux
systems to join an Active Directory environment by making them appear to be
Windows clients. As a means of systems integration, Samba allows a Linux
client to join an Active Directory Kerberos realm and to use Active Directory
as its identity store.

Winbind is a component of the Samba suite to provide unified logon. It uses a
UNIX implementation of Microsoft RPC calls, Pluggable Authentication
Modules (PAMs), and the Name Service Switch (NSS) to allow Windows domain
users to appear and operate as UNIX users on a UNIX system.

WINBIND CONFIGURATION
---------------------

Authselect does not touch winbind's configuration. Please, read winbind's
documentation to see how to configure it manually. Only local users will be
available on the system if there is no existing winbind configuration.

AVAILABLE OPTIONAL FEATURES
---------------------------

with-faillock::
    Enable account locking in case of too many consecutive
    authentication failures.

with-mkhomedir::
    Enable automatic creation of home directories for users on their
    first login.

with-fingerprint::
    Enable authentication with fingerprint reader through *pam_fprintd*.

with-pam-gnome-keyring::
    Enable pam-gnome-keyring support.

with-pam-u2f::
    Enable authentication via u2f dongle through *pam_u2f*.

with-pam-u2f-2fa::
    Enable 2nd factor authentication via u2f dongle through *pam_u2f*.

with-krb5::
    Enable Kerberos authentication with *pam_winbind*.

with-silent-lastlog::
    Do not produce pam_lastlog message during login.

with-pamaccess::
    Check access.conf during account authorization.

with-pwhistory::
    Enable pam_pwhistory module for local users.

without-nullok::
    Do not add nullok parameter to pam_unix.

DISABLE SPECIFIC NSSWITCH DATABASES
-----------------------------------

with-custom-passwd::
Ignore "passwd" database set by the profile.

with-custom-group::
Ignore "group" database set by the profile.

EXAMPLES
--------
* Enable winbind with no additional modules

authselect select winbind

* Enable winbind and create home directories for users on their first login

authselect select winbind with-mkhomedir

SEE ALSO
--------
* man winbindd(8)
PK�����J3kZ�L�_�
���
����winbind/system-authnu��[�����������auth        required                                     pam_env.so
auth        required                                     pam_faildelay.so delay=2000000
auth        required                                     pam_faillock.so preauth silent                         {include if "with-faillock"}
auth        sufficient                                   pam_fprintd.so                                         {include if "with-fingerprint"}
auth        sufficient                                   pam_u2f.so cue                                         {include if "with-pam-u2f"}
auth        required                                     pam_u2f.so cue {if not "without-pam-u2f-nouserok":nouserok} {include if "with-pam-u2f-2fa"}
auth        sufficient                                   pam_unix.so {if not "without-nullok":nullok}
auth        [default=1 ignore=ignore success=ok]         pam_usertype.so isregular
auth        sufficient                                   pam_winbind.so {if "with-krb5":krb5_auth} use_first_pass
auth        required                                     pam_faillock.so authfail                               {include if "with-faillock"}
auth        optional                                     pam_gnome_keyring.so only_if=login auto_start          {include if "with-pam-gnome-keyring"}
auth        required                                     pam_deny.so

password    requisite                                    pam_pwquality.so local_users_only
password    [default=1 ignore=ignore success=ok]         pam_localuser.so                                       {include if "with-pwhistory"}
password    requisite                                    pam_pwhistory.so use_authtok                           {include if "with-pwhistory"}
password    sufficient                                   pam_unix.so sha512 shadow {if not "without-nullok":nullok} use_authtok
password    sufficient                                   pam_winbind.so {if "with-krb5":krb5_auth} use_authtok
password    required                                     pam_deny.so

account     required                                     pam_access.so                                            {include if "with-pamaccess"}
account     required                                     pam_faillock.so                                          {include if "with-faillock"}
account     required                                     pam_unix.so broken_shadow
account     sufficient                                   pam_localuser.so
account     sufficient                                   pam_usertype.so issystem
account     [default=bad success=ok user_unknown=ignore] pam_winbind.so {if "with-krb5":krb5_auth}
account     required                                     pam_permit.so

password    requisite                                    pam_pwquality.so local_users_only
password    [default=1 ignore=ignore success=ok]         pam_localuser.so                                       {include if "with-pwhistory"}
password    requisite                                    pam_pwhistory.so use_authtok                           {include if "with-pwhistory"}
password    sufficient                                   pam_unix.so sha512 shadow {if not "without-nullok":nullok} use_authtok
password    sufficient                                   pam_winbind.so {if "with-krb5":krb5_auth} use_authtok
password    required                                     pam_deny.so

password    required                                     pam_deny.so

Selecting this profile will enable Network Information Services as the source
of identity and authentication providers.

NIS CONFIGURATION
-----------------

Authselect does not touch NIS configuration. Please, read NIS' documentation
to see how to configure it manually.